Ultrasonic processor 750 W (Lab)

The most talented of our Ultrasonic Processors comes with : Energy Setpoint : monitors the amount of energy delivered and terminates the Ultrasonics at setpoint ; Automatic Tuning and Frequency Control ; Temperature Controller from 1 deg. C to 100 deg. C ; precludes overheating (requires optional temp. Probe) ; Consistent Reproducibility microprocessor memory automates repetitive tasks and eliminates variability (up to 10 procedures) ; Microprocessor Based for digital accuracy and repeatability ; Wattmeter displays delivered power (watts) ; Automatic Amplitude Compensation ; Real Time Display ; Variable Power Output Control Allows to set to any desired amplitude ; Ten Hour Process Timer from 1 sec to 10 h ; Elapsed Time Indicator ; Independent On/Off Pulser cycles from 1 second to 59 seconds ; User Friendly ; Smallest Footprint. Comes with a 13 mm (1/2 inch) probe with replaceable tip (or any other upon request) and a 5 year warranty (except tip). This item is always on stock.

A very complete Ultrasonic Processors comes with : Energy Setpoint : monitors the amount of energy delivered and terminates the Ultrasonics at setpoint ; Automatic Tuning and Frequency Control ; Wattmeter displays delivered power (watts) ; Automatic Amplitude Compensation ; Real Time Display ; Variable Power Output Control Allows to set to any desired amplitude ; Ten Hour Process Timer from 1 sec to 10 h ; Elapsed Time Indicator ; Independent On/Off Pulser cycles from 1 second to 59 seconds ; User Friendly ; Smallest Footprint. Comes with a 13 mm (1/2 inch) probe with replaceable tip (or any other upon request) and a 5 year warranty (except tip). This item is always on stock.

Rent or rent-to-own a 750 Watt (or 500 W upon request) Ultrasonic Processors for 2 weeks. This item is always on stock (yet, we suggest that you make a reservation). This items corresponds to the rental for the the first 2 weeks. If you wish to keep it longer, simply add additional weeks or months. Any additional week is 199 Euros ; additional month : 599 Euros. If you want to buy the unit, rentals full value is deducted from the instrument's price.

The smaller the tip diameter, the higher the intensity... Dimensions : see drawing (5/64 inch). This sonotrode, autoclavable, made of titanium alloy TI-6AL-4 V, is recommended for volumes from 150 µl to 5 ml. Mounts on 130 W without coupler and on 500/750 W with coupler US630-0421 (required). This item is always on stock. We ship worldwide.

The smaller the tip diameter, the higher the intensity... Dimensions : see drawing. This sonotrode, autoclavable, made of titanium alloy TI-6AL-4 V, is recommended for volumes from 250 µl to 10 ml. Mounts on 130 W without coupler and on 500/750 W with coupler US630-0421 (required). This item is always on stock. We ship worldwide.

Tip diameter : 3 mm (1/8 inch). Recommended for volumes from 1 to 10 ml. Microtips are used to process small samples at very high intensity. The tapered microtip screws into the 1/2 inch (13 mm) threaded end probe in place of the replaceable tip. This items is always on stock.

Tip diameter : 5 mm (3/16 inch). Recommended for volumes from 3 to 20 ml. Microtips are used to process small samples at very high intensity. The tapered microtip screws into the 1/2 inch (13 mm) threaded end probe in place of the replaceable tip. This items is always on stock.

Tip diameter : 6 mm. Recommended for volumes from 5 to 50 ml. Microtips are used to process small samples at very high intensity. The tapered microtip screws into the 1/2 inch (13 mm) threaded end probe in place of the replaceable tip. This items is always on stock.

This 13 mm sonotrode, autoclavable, for 500 or 750 W processor, made of titanium alloy TI-6AL-4 V, is recommended for volumes from 10 to 250 ml. This probe has a replaceable tip ; it is thus different from US630-0219 (which does not have a replaceable tip and is recommended for volatile solvents). Dimensions : see drawing (1/2 inch). A fine threading is located on the larger section of the body, at nodal point (where vibration is minimal), this allows watertight mounting on low pressure vessels. This item is always on stock. We ship worldwide.

This 13 mm sonotrode, autoclavable, for 500 or 750 W processor, made of titanium alloy TI-6AL-4 V, is recommended for volumes from 10 to 250 ml. This probe is usualy called solid ; it is thus different from US630-0220 (which has a replaceable tip). It is recommended for volatile solvents. Dimensions : see drawing (1/2 inch). A fine threading is located on the larger section of the body, at nodal point (where vibration is minimal), this allows watertight mounting on low pressure vessels. This item is always on stock. We ship worldwide.

This 19 mm (3/4 in.) sonotrode, autoclavable, for 500 or 750 W processor, made of titanium alloy TI-6AL-4 V, is recommended for volumes from 10 to 250 ml. This probe is usualy called solid ; it is thus different from US630-0207 (which has a replaceable tip). It is recommended for volatile solvents. Dimensions : see drawing (1/2 inch). A fine threading is located on the larger section of the body, at nodal point (where vibration is minimal), this allows watertight mounting on low pressure vessels. It can also be mounted on dual probes. This item is always on stock. We ship worldwide.

Diameter : 1/2 inch (13 mm) ; Connecting stud : 1/4-20. Fits on US630-0560 (130 W) and US630-0220 (750/500 W). This items is always on stock.

This Coupler is used to mount a stepped microtip on a 500 or 750 W sonicator. This item is always on stock.

For hands-free remote operation ; 10 inches (3 mm) cable. This items is always on stock.

The dual probe boosts productivity by processing two (25-500 ml) samples simultaneously. Consists of an aluminum coupler Order No.630-0562 and two 3/4 in.(19 mm) solid probes Order No.630-0208. Output power delivered to each probe is identical, and half that delivered by the power supply. Connecting stud 1/2-20. Order No.630-0525 The 750 Watt Ultrasonic Processor and dual probe combination is the only system in the industry capable of delivering up to 375 Watts per probe, meeting all EPA requirements specified in Method SW 846-3550.

This valuable time saving tool maximizes productivity and can be used either manually or with automated systems. The multi-element probe screws into the converter in place of the 1/2 inch (13 mm) probe. Within 2 % variation, the energy delivered to each tip is uniform. In this autoclavable four element probe, the spacing between the tips is 23/32 inch (18 mm). Length : coupler and stepped microtips is 10 1/4 inch (260 mm). Length : coupler and microtips is 7 inch (175 mm). This item is always on stock.

This valuable time saving tool maximizes productivity and can be used either manually or with automated systems. The multi-element probe screws into the converter in place of the 1/2 inch (13 mm) probe. Within 2 % variation, the energy delivered to each tip is uniform. In this autoclavable four element probe, the spacing between the tips is 23/32 inch (18 mm). Length : coupler and stepped microtips is 10 1/4 inch (260 mm). Length : coupler and microtips is 7 inch (175 mm). This item is always on stock.

This valuable time saving tool maximizes productivity and can be used either manually or with automated systems. The multi-element probe screws into the converter in place of the 1/2 inch (13 mm) probe. Within 2 % variation, the energy delivered to each tip is uniform. In this autoclavable four element probe, the spacing between the tips is 23/32 inch (18 mm). Length : coupler and stepped microtips is 10 1/4 inch (260 mm). Length : coupler and microtips is 7 inch (175 mm). This item is always on stock.

This valuable time saving tool maximizes productivity and can be used either manually or with automated systems. The multi-element probe screws into the converter in place of the 1/2 inch (13 mm) probe. Within 2 % variation, the energy delivered to each tip is uniform. In this autoclavable four element probe, the spacing between the tips is 23/32 inch (18 mm). Length : coupler and stepped microtips is 10 1/4 inch (260 mm). Length : coupler and microtips is 7 inch (175 mm). This item is always on stock.

Can be mounted on VCX750 or VCX500. This item is always on stock.

This cell has double walls through which cooling water can circulate. Cell volume is 100 mL. This item is always on stock.

This cell has double walls through which cooling water can circulate. Cell volume is 10 mL. This item is always on stock.

The Rosett cooling cell enables uniform treatment at low temperatures. Typically, the cell is placed in a cooling bath. The liquid forced by the ultrasonic energy circulates repeatedly under the probe and throughout the cooling arms. Cell volume is 30 mL. This item is always on stock.

The Rosett cooling cell enables uniform treatment at low temperatures. Typically, the cell is placed in a cooling bath. The liquid forced by the ultrasonic energy circulates repeatedly under the probe and throughout the cooling arms. Cell volume is 300 ml. This item is always on stock.

This flow cell allows for 100 L per hour sonication under max. Pressure of 50 psi. Works with either our 750 or 1500 W processor. Weight 4 kg, AISI 316 SS, autoclavables, quick lock fittings. Sonication probe (US630-0597) : Titanium alloy TI-6AL-4. This item is always in stock.

Cup horns can process samples in isolation without probe intrusion, precluding any possibilities of crosscontamination or airborne pollution. Especially useful when working with radioactive, toxic, pathogenic, and biohazardous materials. Typical applications include : gentle disruption of cells, lysing of blood cells and platelets, shearing radioactively labeled proteins and DNA, liposome preparation, and releasing cellular material from viruses. The water-filled cup horn is screwed into the inverted converter in place of the 1/2 in.(13 mm) probe. The vibrations produced within the cup induce cavitation inside a test tube (s) immersed in the water. Water can be circulated through the unit to inhibit heat build-up during extended operation. Glass cup facilitates disassembly for cleaning purposes, and in contrast to polycarbonate cup horn with removable plastic fittings is 100 % leakproof. The probe is fabricated from titanium alloy TI-6AL-4 V and is autoclavable. Supplied with floating microtube holder and splash shield. This item is always available on stock.

The plastic holder conveniently suspends 8 microtubes inside the 21/2'(64 mm) and 3'(76 mm) cup horn. Holder floats and keeps tubes immersed at a constant depth regardless of the fluctuation in water level. Pressure plate holds tubes firmly in place and keeps tube caps closed.

Sealed Atmosphere Treatment Chamber The stainless steel sealed atmosphere treatment chamber screws onto the 1/2 in.(13 mm) probe. This accessory enables safe batch treatment of toxic, pathogenic, and biohazardous materials at high intensity. Ports located above the sample level permit purging with an inert gas, or capturing released gases. An integral cooling jacket, through which a suitable cooling liquid can be circulated, inhibits heat build up during extended operation. Capacity : 50 ml. Autoclavable.

The converter clamp is designed to securely support 2 1/2'(64 mm) diameter converter onto standard stands with 1/2'(13 mm) diameter support rod. Heavy duty black anodized aluminum clamp recommended for industrial applications and for use with the multi-element probe. This item is always on stock.

The stainless steel continuous flow cell can be used in a closed system to assure sterile processing when working with infectious materials. The flow cell screws onto the 1/2 in.(13 mm) probe. Recommended for the treatment of low viscosity samples, which do not require extended exposure to ultrasonics. Designed primarily for dispersing and homogenizing at rates up to 20 liters/hour, pressure rating 50 psi (345 kPa/3.45 bar). Fitting accepts 5/16 in.(8 mm) tubing. Autoclavable. This item is always on stock.

Plate : 14 x 23 cm ; Stem : diameter 13 mm ; height : 61 cm (24 inches). This includes BOTH the plate and stem and can be used with all ultrasonic processors (including : 130, 50 and 750 W) ; Converter Clamp (which holds the converter to the stem) is not included. This item is always on stock.

Sonochemical Reaction Vessels The sonochemical reaction vessels consist of a borosilicate reaction chamber and a stainless steel collar or adapter. With the Suslick reaction vessel the collar screws onto a solid or threaded end 1/2 in.(13 mm) probe at the nodal point (point of no activity). The glass chamber slides into the collar and is held in place by an internal O-ring. With the other vessels, the adapter screws onto a full wave 10 in.(254 mm) long 1/2 in.(13 mm) probe. The adapter slides into the glass chamber and is held in place by the action of a threaded nylon bushing compressing an O-ring. Moving the adapter in or out of the vessel allows the probe to be immersed at different depths, ensuring optimum transfer of energy into the sample. Suslick reaction vessel. Three side ports accept septum for syringe charging or retrieval. Glass chamber height : 31/4 in.(82 mm). Supplied with side port plastic caps.

This 13 mm autoclavable sonotrode for 500 or 750 W processor, made of titanium alloy TI-6AL-4 V, is recommended for volumes from 10 to 250 ml. This probe has a flange, at nodal point (where vibration is minimal), this allows watertight mounting on sealed vessels. This item is always on stock. We ship worldwide.