Ultrasonic processors 130W (Lab)

Ultrasonic processor VCX130 is a best seller : it offers many functions for a reasonable price ! 130 W, 20 kHz, auto-tune, digital display, amplitude adjustment, overload protection, remote ON/OFF switch port, pulse (ON can be set up from 1 to 59 sec. OFF = 1 sec) ; timer 1 sec to 10 h. Comes with a 6 mm tip (1/4') (250 µl-50 ml) (or any other upon request) and mounting tools. Warranty : 5 years (except tip). This item is always on stock. We ship worldwide. Box dimensions : 47 x 47 x 27 cm Bow weight : 8 kg.

Ultrasonic processor VCX134 offers many functions for a reasonable price ! 130 W, 40 kHz, auto-tune, digital display, amplitude adjustment, overload protection, remote ON/OFF switch port, pulse (ON can be set up from 1 to 59 sec. OFF = 1 sec) ; timer 1 sec to 10 h. Comes with a 6 mm tip (250 µl-50 ml) (or any other upon request) and mounting tools. Sonotrodes and converter for this 40 kHz model are shorter than for VCX130 (20 kHz) ; generated noise is also less audible. Warranty : 5 years (except tip). This item is always on stock. We ship worldwide.

Ultrasonic processor 130 W 20 kHz with Energy monitor, Digital wattmeter, Automatic tuning, Automatic amplitude compensation, Microprocessor based, Thumb actuated pulser, Elapsed time indicator, Variable power output control. Shipped complete and ready for operation with a 1/8" (3 mm) probe (150 µl to 10 ml) (can be shipped with any other probe upon request), tool kit, and instruction manual. Warranty 5 years. This item is always available on stock. We ship worldwide.

Rent or rent-to-own an Ultrasonic processor for 2 weeks. This item is always on stock (yet we recommend that you make a reservation early). If you wish to rent longer, simply add weeks and months to this initial rental. Additionnal week : 115 Euros ; additional month : 349 Euros. If you buy this instrument, the rental amount is fully deductible. Manual in English. We ship worldwide.

The smaller the tip diameter, the higher the intensity... Dimensions : see drawing (5/64 inch). This sonotrode, autoclavable, made of titanium alloy TI-6AL-4 V, is recommended for volumes from 150 µl to 5 ml. Mounts on 130 W without coupler and on 500/750 W with coupler US630-0421 (required). This item is always on stock. We ship worldwide.

The smaller the tip diameter, the higher the intensity... Dimensions : see drawing. This sonotrode, autoclavable, made of titanium alloy TI-6AL-4 V, is recommended for volumes from 250 µl to 10 ml. Mounts on 130 W without coupler and on 500/750 W with coupler US630-0421 (required). This item is always on stock. We ship worldwide.

This 13 mm (1/2 inch) sonotrode, autoclavable, made of titanium alloy TI-6AL-4 V, is recommended for volumes from 50 to 150 ml. This probe, named solid, is made of only one piece ; it is thus different from US630-0560 which has a replaceable tip. Dimensions : see drawing (1/2 inch). This item is always on stock. We ship worldwide.

This 13 mm sonotrode, autoclavable, made of titanium alloy TI-6AL-4 V, is recommended for volumes from 50 to 150 ml. This probe has a replaceable tip ; it is thus different from US630-0561 (which does not have a replaceable tip and is recommended for volatile solvents). Dimensions : see drawing (1/2 inch). This item is always on stock. We ship worldwide.

Diameter : 1/2 inch (13 mm) ; Connecting stud : 1/4-20. Fits on US630-0560 (130 W) and US630-0220 (750/500 W). This items is always on stock.

Plate : 14 x 23 cm ; Stem : diameter 13 mm ; height : 61 cm (24 inches). This includes BOTH the plate and stem and can be used with all ultrasonic processors (including : 130, 50 and 750 W) ; Converter Clamp (which holds the converter to the stem) is not included. This item is always on stock.

Even though ultrasonic vibrations are above the human audible range, ultrasonic processing produces high pitch noise in the form of harmonics, which emanate from the vessel walls and the fluid surface. The sound abating enclosure permits extended processing without discomfort, by reducing the noise by 35 dB. The probe/converter assembly is supported by the clamp, and the converter cable is fed through the opening in the top. When required, four side access ports accommodate the tubing delivering the coolant and the sample to the processing vessel while the door is closed. The unit is faced on the exterior with white laminate, and lined on the interior with white waterproof noise abating material. The access door permits observation during treatment and protects the operator against accidental splashing. Support rod and converter clamp are included. Outside dimensions (H x W x D) : 20'x 12'x 12'(510 x 300 x 300 mm). This item is always on stock. We ship worldwide.

Even though ultrasonic vibrations are above the human audible range, ultrasonic processing produces high pitch noise in the form of harmonics, which emanate from the vessel walls and the fluid surface. The sound abating enclosure permits extended processing without discomfort, by reducing the noise by 35 dB. The probe/converter assembly is supported by the clamp, and the converter cable is fed through the opening in the top. When required, four side access ports accommodate the tubing delivering the coolant and the sample to the processing vessel while the door is closed. The unit is faced on the exterior with white laminate, and lined on the interior with white waterproof noise abating material. The access door permits observation during treatment and protects the operator against accidental splashing. Support rod and converter clamp are included. Outside dimensions (H x W x D) : (400 x 370 x 700 mm). This item is always on stock. We ship worldwide. See also our economy version (self-mount).

The micro cup horn can process a sample in isolation without probe intrusion, precluding any possibilities of cross-contamination or airborne pollution. Especially useful when working with radioactive, toxic, pathogenic, and biohazardous materials. Typical applications include : gentle disruption of cells, lysing of blood cells and platelets, shearing radioactively labeled proteins and DNA, liposome preparation, and releasing cellular material from viruses.
The water-filled micro cup horn screws into the inverted converter in place of a probe. The vibrations produced within the cup induce cavitation inside a test tube immersed in the water. Water can be circulated through the unit to inhibit heat build-up during extended operation. Glass cup facilitates disassembly for cleaning purposes, and in contrast to polycarbonate cup horns with removable plastic fittings, is 100 % leakproof.
Note: The intensity of cavitation within the test tube is lower than with direct probe contact. To obtain comparable results when using the cup horn, multiply the processing time by 4. Inside diameter : 1 inch (25 mm). Probe : Titanium alloy : TI-6AL-4 V. Connecting stud 1/4-20. This item is always on stock. We ship worldwide.

The continuous flow cell screws into the converter in place of the probe. Recommended only for the treatment of low viscosity samples, which do not require extended exposure to ultrasonics. Designed primarily for dispersing and homogenizing at rates up to 15 liters/hour. Vessel composition : Glass. The probe and processing chamber are fabricated from titanium alloy TI-6AL-4 V and are autoclavable. Connecting stud : 1/4-20. For low pressure applications only. This item is always on stock.

This cell has double walls through which cooling water can circulate. Cell volume is 10 mL. This item is always on stock.

This cell has double walls through which cooling water can circulate. Cell volume is 100 mL. This item is always on stock.

The Rosett cooling cell enables uniform treatment at low temperatures. Typically, the cell is placed in a cooling bath. The liquid forced by the ultrasonic energy circulates repeatedly under the probe and throughout the cooling arms. Cell volume is 30 mL. This item is always on stock.

The Rosett cooling cell enables uniform treatment at low temperatures. Typically, the cell is placed in a cooling bath. The liquid forced by the ultrasonic energy circulates repeatedly under the probe and throughout the cooling arms. Cell volume is 300 ml. This item is always on stock.

For hands-free remote operation ; 10 inches (3 mm) cable. This items is always on stock.

Converter Clamp Designed to securely support 1 1/4'(32 mm) diameter converter, this chemical-resistant reinforced plastic converter clamp mounts onto standard stands with 1/2'(13 mm) diameter support rod. This item is always on stock.

Eight Element Probe-Consists of 630-0604 20 kHz coupler and 8 630-0584 tips.